0
Option 1:
One blowing machine with one heating oven
(Production Capacity per hour: 0.1–2.5L: 850pcs, 3–5L: 600pcs)
Option 2:
Two blowing machines with one heating oven
(Production Capacity per hour: 0.1–2.5L: 1700pcs, 3–5L: 1200pcs)
| Model | HM-1500 | |
| Product Material | PET | |
| Volume | 0.1L - 2L | |
| Theoretical Output | 1200 - 1500 PCS/H | |
| Preform Length | 15mm - 350mm | |
| Preform Inner Diameter | φ5mm - 38mm | |
| Max. Mould Plate Dimension (L x W) | 350 x 380 mm | |
| Max. Mould Thickness | 180 mm | |
| Clamping Force | 45 KN | |
| Mould Opening Stroke | 160 mm | |
| Main Machine Size (L x W x H) | 160 x 60 x 161 CM | |
| Main Machine Weight | 500 Kg | |
| Heater Size (L x W x H) | 187 x 63 x 145 CM | |
| Heater Weight | 250 Kg | |
| Power | 17.5 kw | |
| Air compressor | Unit | 1.2M3/min 30KG |
| Volume | M3 | 1.2 |
| Pressure | Kg | 30 |
| Speed | r/min | 850 |
| Power | KW | 15 |
| Overall Dimension | mm | 2000×1100×1600 |
| Weight | kg | 620 |
| Refrigeration Air Dryer | Unit | 3.0M3/min 3.0Mpa |
| Flow capacity | Nm3/min | 3.0 |
| W.P | Mpa | 3.0 |
| Inlet Temp. | ℃ | ≤80 |
| Dew point | ℃ | 23 |
| Ambient Temp. | ℃ | ≤38 |
| Power supply | V/HZ | 220/50 |
| Compressor power | Kw | 0.75 |
| Cold Medium | mm | 1050×650×1100 |
| Weight | Kg | 120 |
Preform heater adopts infrared lamp as heating unit. Infrared has powerful thermal-radiation capacity, which can heat up preform to required temperature in a very short time, while the strong thermal-penetrability provides continuous and uniform heating inside of preform and on surface of the preform.
Preform heater adopts independent temperature control unit for each heating zone to offer ideal temperature for various preform. Each heating lamp has a voltage regulator to control the voltage of the heating lamps and keep it working smoothly. With the LED display, it becomes easy and convenient to inspect and adjust the voltage value.
Preform heater is equipped with air-cooling and water-cooling device to remove the remained heat on preform loader and prevent preform neck from deformation. And reliable air exhaust system placed on the heater keeps heating temperature continuous and stable during preform heating process.
Multi adjusting device placed on the preform heater keeps the machine fitting with different performs. With those devices, the heating channel’s width and height can be changed easily according to the different neck size and neck height.
For easy operation, preform heater is equipped with plenty of assistant units including centralised cooling water supply system, portable base unit for machine’s convenient moving, reliable air entry unit and so on, which makes operation simple and convenient for
JND-880 adopts a three-plate toggle clamping system to provide the powerful clamping force required by high pressure blowing up to 35 bars. Besides, the system has an adjustment device to change the distance between the front & middle mold-plate and the position of stretch-seal cylinder required in different mold installation